Included are:

-> Manual  – booklet
-> Safety booklet
-> Pointer rod – steel
-> Alignment rod – steel
-> Angle scale – aluminum or steel plate with glued on paper scale (protected by plastic foil), #10-32 threaded adapter on back of scale
-> Spare scale (not shown in photo) – paper
-> Scale fixture, i.e., scale mounting fixture – ¾” steel or aluminum flat with keyway, #10-32 thumb bolt, and steel rod
-> Fixture, i.e., fixture for pointer rod – aluminum square bar

This tool is for private and non-commercial applications

Prerequisites: whatever lathe model you have you will need

-> a fast tool change system or similar mounting fixture that allows to rotate the tool post (compount slide)
-> and enough space along the lathe bed (distance between centers of at least 10”)

Compatibility? The system is explicitely tested on

-> a 4100 HiTorque Mini Lathe
-> which appears to be compatible to a SIEG SC2 lathe as well as on a
-> Craftsman 109.0703 lathe which is apparently identically with a
-> Dunlap 109.0703 lathe (the .0703 model is the so-called long bed model)
but should work on most China import type lathes.